Showing posts with label bracelet tutorial. Show all posts
Showing posts with label bracelet tutorial. Show all posts

Thursday, July 28, 2011

Manners Baby Burp Cloth Tutorial

With Baby number two on the way I thought it was time to start getting a few things organised.  I am very blessed to be having another little girl so we have the clothes sorted but many of the burp cloths and bibs have seen better days so late one night (unable to sleep) I came up with the 'manners burp cloth' idea and the lovely Jessica at Me Sew Crazy kindly allowed me to blog sit and share the tutorial with her readers and now I bring it to you here at Clare's Place. 

Burp cloths are essential for new babies and this applique design makes for a unique handmade baby gift.  So with out further ado I give you my version of a baby burp cloth...


Before you begin:
  • Please be sure to read instructions all the way through before commencing project.
  • All seam allowances are included in measurements and are ¼ inch unless otherwise stated.
  • This pattern is intended for personal use only. Please respect my work and do not reproduce this pattern or any part thereof for any purpose.
Materials:
  • 8” X 18“ towelling fleese or other soft absorbent fabric,
  • 8“ x 18” Cotton fabric for burp cloth,
  • Scraps of cotton fabric for applique letters,
  • Fusable webbing (or heavy duty heat and bond – you may not need to stitch around your letters if using heavy duty heat and bond),
  • Sewing machine,
  • Pins,
  • Co-ordinating thread,
  • Cutting ruler,
  • Fabric scissors,
  • Pencil,
  • Air dry or water erasable marker,
  • Rotary cutter,
  • Cutting mat.

Instructions:
  • Fold your cotton fabric in half – right sides together. Place template on folded fabric, lining up the fold.
  • Trace around template and cut along traced line (I used a rotary cutter and ruler along the straight lines to achieve a more accurate cut and used scissors on the curves.).
  • Repeat for towelling.

Appliqué:
  • Trace your required appliqué letters onto the paper side of fusible webbing / heat and bond 
  • Cut around outside of traced designs being sure not to cut directly on line.
  • Press onto wrong side of chosen fabric, paper side facing up.
  • Cut out appliqué pieces along the traced lines.
  • Peel backing paper off. Position onto the right side of the cotton burp coth 1” from edges as desired, Press into position.
  • Freehand Machine stitch around the edge of the letters using a straight stitch 2-3 times, varying the position you stitch each time. Alternatively you can Blanket stitch around the designs either by hand or machine in a coordinating thread to your fabric (I have found the heavy duty heat and bond does not reqire any stitching and doing so may blunt or break your needle).
  • Pin the two rectangles together right sides facing.
  • Sew your pieces together using a ¼” seam. Be sure to leave a 3” gap at one end to turn your cloth the correct way.
  • Clip the corners being sure not to cut your stitching. 
  • Turn the right way out and press (cotton side not to towelling side).
  • Close the opening by tucking the fabric inside the burp cloth and pin.
  • Topstitch 1/8” from the edge around the perimeter of the burp cloth. Trim any stray threads.

I hope you enjoy the burp cloth tutorial as much as I enjoyed making it.  I know that the 'manners' burp cloth concept has proven quite popular and has been featured on Tot Craft and Craft Gossip also, so I hope you like it too!  If you use this pattern I would love to see photos of your work!  Now over to you to sew up a storm ;)

Tuesday, July 19, 2011

Felt Flower Tutorial

I have admired the various flowers that people create from material and felt for a little while now and decided to have a go making some myself. After experimenting a bit I have created a tutorial of the way I make them for anyone interested.

These felt flowers are perfect to make into hair accessories or dress up an outfit or bag by making them into brooches that can be removed for washing. With theses pretty felt flowers the possibilities are endless  

Materials:

8” X 8” felt,
Pearl beads or small buttons for flower centre,
Invisible or co-ordinating thread,
Fabric scissors,
Air dry or water erasable marker,
Bobby pins with a pad or hair ties,
Hot glue gun,
Clear template plastic (recommended but not essential)
Flower templates.

Instructions:
  • Trace the flower designs onto template plastic and cut out along traced line. (I found that if you are making multiple flowers paper templates quickly damage).
  • Trace around the desired flower template using an air dry or water erasable marker five times being sure not to overlap.
  • Cut out each flower along traced lines (if you used a water erasable marker you will need to spray pieces with water to remove ink from the edges of the flower).
  • Place one flower down. This will be the base of the flower and anchor for the petals.
  • Fold each of your remaining four flowers in half and layer onto your flower base weaving each under and over just as you would to close a box.
  • Using invisible tread make a knot at the back of the flower, bring the needle through the centre of the flower being sure to catch one of the petals before returning to the back of the flower. Continue bringing your needle through the centre until each petal has been caught (I recommend stitching each petal three times to ensure it is secured tightly.
  • Finish the flower by sewing a bead (small flower) or small button (large flower) to the centre. I used small fabric covered buttons for the centre of my large flowers.


 Attach to Bobby Pin:
  • To attach to the bobby pin place a small amount of glue onto the bobby pin pad using a hot glue gun.
  • Centre and press the small flower back onto the bobby pin pad before the glue sets.
  Attach to Hair tie:
  • Cut a small rectangle of felt from the felt off cuts  
  • Place a small amount of glue onto one short side of the rectangle using a hot glue gun.
  • Press onto the Large flower back as shown before the glue sets.
  • Slip your hair tie under the unglued end of the rectangle.
  • Place a small amount of glue onto the other short side of the rectangle using a hot glue gun and press down. Be sure not to glue your hair tie in the process. I have found that by not gluing the hair tie directly onto the flower and making the rectangle allows you to shift the flower into position more easily when tying the hair back.


 
I hope you enjoy making these as much as I do!

 
 

Wednesday, January 5, 2011

Bracelet tutorial

This bracelet is simple yet stylish and a great way to brighten up your outfit.


Materials:
Coloured wooden beads (approx 1.5cm)
Hat elastic (or similar)
Scissors
Ribbon in a colour to coordinate with your beads
Clear nail polish

Thread the beads onto one end of the hat elastic while holding the opposite end so as not to loose the beads. I used 13 beads. Depending on your wrist size you may want more or less.


When you are happy with amount of beads you have tie a knot in the ends of the hat elastic to secure.


Cut tails from elastic.


Cover knot with ribbon


Finish the ends of the ribbon by folding the ends in half and cutting from the bottom outer edge diagonally to the centre of the ribbon to make a fork in the ribbon.


Stop the ribbon from fraying by painting a small amount of clear nail polish on the ends of the ribbon.


Allow the nail polish to dry and you are good to go!

Pinterest link